Fusion MS-RA60 Sound System Quick Guide
Simple Rhinomax-specific instructions to operate your Fusion MS-RA60 marine sound system – Bluetooth, radio, zones and basic settings. For full technical details and installation information, download the official Garmin / Fusion owner’s manual below.
⚙️ Basic Operation (Rhinomax Edition)
Use these steps for everyday operation of your Fusion MS-RA60 in a Rhinomax camper.
1. Power & Volume
Press the Power button briefly to turn the stereo ON.
Press again to mute / unmute audio.
Press and hold to turn the stereo OFF.
Turn the dial to adjust volume. Press the dial to switch between
zones (e.g. interior / exterior) before adjusting.
2. Changing Sources
Press the Source button to cycle through the available inputs:
Bluetooth, FM, AM, DAB (where fitted) and AUX.
Stop on the source you want – the screen will show the active source at the top.
3. Pairing a Bluetooth Device
Select the Bluetooth source, then press the Menu button and choose
DISCOVERABLE.
On your phone, enable Bluetooth and select “RA60” from the list of devices, then confirm
any pairing prompts.
Once paired, play music on your phone and control tracks and volume from the stereo.
4. Zones, Tone & Subwoofer
From any source screen, press and hold the dial to bring up the
SUB LEVEL adjustment, then turn the dial to set the subwoofer level (if fitted).
Press Menu > SETTINGS > ZONE to adjust balance, zone volume limits and tone
(bass / mid / treble) for each zone.
📶 Bluetooth & Radio Controls
Quick reference for common Bluetooth and radio functions you’ll use on the road.
Bluetooth Playback & Device Management
- Play / pause: On Bluetooth, tap the centre Play / Pause key.
- Skip tracks: Use the left / right arrow keys to go to the previous or next track.
- Select a different paired device:
- With Bluetooth selected, press Menu and choose your device from the list.
- The RA60 can remember up to 8 paired devices.
- Improve Bluetooth performance:
- Keep your phone within about 10 m and avoid metal objects blocking line-of-sight.
- Turn off DISCOVERABLE after pairing to reduce interference.
FM / AM Radio Basics
- Set tuner region:
- Press Menu > SETTINGS > TUNER REGION and select your region (e.g. Australasia).
- Change stations:
- Press the centre key to cycle tuning mode: AUTO / MANUAL / PRESET.
- Use left / right arrows to scan or step through stations or presets.
- Save a preset:
- Tune to the station you want.
- Press and hold the centre key to save it as a preset, or go Menu > PRESETS > SAVE CURRENT.
DAB Digital Radio (If Equipped)
- Set the tuner region to a country where DAB is available.
- Select the DAB source and press the centre key to scan for stations.
- Use left / right arrows to move between stations. Hold to change ensembles (groups of stations).
- Save favourites via Menu > BROWSE > PRESETS.
🩺 Quick Troubleshooting
Run through these checks before assuming there’s a major fault.
No Sound or Stereo Not Responding
- Confirm the stereo is powered ON and not muted.
- Check volume is turned up on the active zone and any connected device (phone, tablet, etc.).
- If the front panel is frozen, press and hold the Power button until the unit turns off, then power it back on.
- If problems persist, switch the stereo off at the master power or pull the fuse for about 2 minutes, then reconnect.
Bluetooth Drop-outs or Poor Range
- Keep your phone within 10 m and avoid storing it in metal cupboards or behind heavy structure.
- Turn off DISCOVERABLE once paired – this helps reduce background Bluetooth chatter.
- Try another device to confirm whether the issue is with the phone or the stereo.
Radio / DAB Reception Issues
- Check that the antenna is connected securely and not damaged.
- Confirm the tuner region is correctly set for your location.
- In marginal areas, reception will naturally be weaker – try moving the camper or extending / re-positioning the antenna.
🛠️ Preventative Maintenance Tips
A few simple habits will keep your Fusion system sounding great for years.
Clean the Screen & Panel
Wipe the front panel with a soft damp cloth only – no solvents or harsh cleaners. Avoid spraying cleaners directly onto the stereo.
Look After Speakers & Sub
Avoid running the system at maximum volume for long periods. If you hear distortion, back the volume off slightly and check your bass / subwoofer settings.
Use Fusion-Link Apps
Install the Fusion-Link app on your phone or compatible Garmin watch to control volume, sources and zones – and to update stereo software when new versions are released.